调整推荐依赖firmware-atheros为firmware-atheros | firmware-ath9k-htc

Signed-off-by: gfdgd_xi <3025613752@qq.com>

.github/workflows/building-deb-cross.yml

@@ -30,10 +30,6 @@ jobs:
     uses: GXDE-OS/GXDE/.github/workflows/building-deb-hetao-cross.yml@master
     secrets: inherit
   
-  call-tianlu:
-    uses: GXDE-OS/GXDE/.github/workflows/building-deb-tianlu-cross.yml@master
-    secrets: inherit
-
   call-meimei:
     uses: GXDE-OS/GXDE/.github/workflows/building-deb-meimei-cross.yml@master
-    secrets: inherit
+    secrets: inherit

.github/workflows/configure-building-enviroment-base-system.sh

@@ -62,6 +62,8 @@ if [[ $7 == "backport" ]]; then
     sudo cp -rv .github/workflows/90bookworm-backports $bottlePath/etc/apt/preferences.d/
     echo "deb [trusted=true] https://repo.gxde.top/gxde-os/tianlu-bpo ./" >> $bottlePath/etc/apt/sources.list.d/gxde-os-bpo.list
 fi
+sudo mkdir -p $bottlePath/sources-list
+sudo cp -v .github/workflows/sources-*.list $bottlePath/sources-list
 # 配置 git
 #echo "deb [trusted=true] https://deb.debian.org/debian-ports/ unreleased main" | sudo tee $bottlePath/etc/apt/sources.list.d/debian-unreleased.list
 sudo chroot $bottlePath apt update

.github/workflows/configure-building-enviroment.sh

@@ -33,6 +33,9 @@ fi
 #fi
 apt install -f -y
 apt install debian-ports-archive-keyring debian-archive-keyring -y
+if [[ -f /sources-list/sources-$1.list ]]; then
+    cp /sources-list/sources-$1.list /etc/apt/sources.list.d -v
+fi
 for i in {1..8};
 do
     apt update -o Acquire::Check-Valid-Until=false -y
@@ -59,6 +62,7 @@ apt install dpkg-dev sudo debian-ports-archive-keyring debian-archive-keyring de
 # 如果是 Debian10 就需要安装 Python3 的依赖
 #apt build-dep python3.7 -y
 # 解包 gxde-desktop-base
+
 apt download gxde-desktop-base
 dpkg -x gxde-desktop-base_*.deb /
 rm gxde-desktop-base_*.deb -rfv

.github/workflows/sources-zhuangzhuang.list

@@ -0,0 +1,13 @@
+# 默认注释了源码镜像以提高 apt update 速度，如有需要可自行取消注释
+deb https://deb.debian.org/debian/ trixie main contrib non-free non-free-firmware
+# deb-src https://deb.debian.org/debian/ trixie main contrib non-free non-free-firmware
+
+deb https://deb.debian.org/debian/ trixie-updates main contrib non-free non-free-firmware
+# deb-src https://deb.debian.org/debian/ trixie-updates main contrib non-free non-free-firmware
+
+deb https://deb.debian.org/debian/ trixie-backports main contrib non-free non-free-firmware
+# deb-src https://deb.debian.org/debian/ trixie-backports main contrib non-free non-free-firmware
+
+# 以下安全更新软件源包含了官方源与镜像站配置，如有需要可自行修改注释切换
+deb https://security.debian.org/debian-security trixie-security main contrib non-free non-free-firmware
+# deb-src https://security.debian.org/debian-security trixie-security main contrib non-free non-free-firmware

debian/changelog

@@ -1,4 +1,4 @@
-gxde (2026.02.06) UNRELEASED; urgency=medium
+gxde (2026.02.24) UNRELEASED; urgency=medium
 
   * 新增 remmina 以解决远程问题
   * 改为安装 dde-printer 
@@ -23,8 +23,9 @@ gxde (2026.02.06) UNRELEASED; urgency=medium
   * 新增 GXDE 硬件管理器
   * 推荐安装 deepin 跨端协同
   * 更改 gxde-desktop-extra 推荐依赖
+  * 推荐安装 firmware-atheros | firmware-ath9k-htc
 
- -- gfdgd_xi <3025613752@qq.com>  Fri, 06 Feb 2026 20:04:16 +0800
+ -- gfdgd_xi <3025613752@qq.com>  Tue, 24 Feb 2026 14:00:23 +0800
 
 gxde (2024.10.20) UNRELEASED; urgency=medium
 

debian/control

@@ -49,6 +49,7 @@ Recommends: ${misc:Depends},
  fcitx5-table-wubi98,
  fcitx5-pinyin-zhwiki,
  dde-cooperation,
+ firmware-atheros,
 Description: GXDE New Desktop Environment Extra - Next
  This is a meta package depends GXDE New Desktop Envrionment Extra.
  .
@@ -90,6 +91,7 @@ Conflicts:
  plymouth,
  tela-grub2-themes,
  plymouth-theme-gxde-logo,
+ firmware-atheros | firmware-ath9k-htc,
 Description: GXDE New Desktop Environment For PRoot - Next
  This is a meta package depends GXDE New Desktop Envrionment in Android PRoot.
  .

sync-gitee-to-github/sync.py

@@ -50,16 +50,11 @@ def sync(i):
     os.system(f"rm -rf '{programPath}/git-clone/{i}.git'")
     thread -= 1
 
-data = requests.get("https://github.com/orgs/GXDE-OS/repos_list?q=&page=1", headers=dataHeaders).json()
+data = requests.get("https://api.github.com/users/GXDE-OS/repos", headers=dataHeaders).json()
-# 获取页数
-page = int(data["pageCount"])
 repoList = []
 # 获取仓库列表
-for i in range(1, page + 1):
+for i in data:
-    pageData = requests.get(f"https://github.com/orgs/GXDE-OS/repos_list?q=&page={i}", headers=dataHeaders).json()
+    repoList.append(i["name"])
-    repositories = pageData["repositories"]
-    for j in repositories:
-        repoList.append(j["name"])
 # 多线程处理以提升速度
 thread = 0
 threadMax = 32