移除依赖星火动态壁纸

Signed-off-by: gfdgd_xi <3025613752@qq.com>
debian rootfs环境内置包qt6-base-dev,qt6-base-private-dev
2026-11-05 22:01:11 +08:00 · 2026-10-26 21:58:50 +08:00 · 2026-10-26 19:45:18 +08:00 · 2026-10-26 19:41:50 +08:00 · 2026-10-26 19:25:28 +08:00 · 2026-10-16 22:12:09 +08:00
34 changed files with 1018 additions and 155 deletions
@@ -88,6 +88,7 @@ jobs:
            https://github.com/$GITHUB_REPOSITORY \
            ${{ inputs.rootfs-source }} \
            ${{ github.ref_name }} \
+                        ${{ inputs.gxde-codename-upload }} \
            $isBackport

      - name: Building ${{ GITHUB.repository }}
@@ -97,11 +98,13 @@ jobs:
            env gitPath=$gitPath bash .github/workflows/run-command-in-chroot.sh \
              env GXDE_ARCH=${{ inputs.arch }} GXDE_CODENAME=${{ inputs.gxde-codename }} \
              GXDE_ARCH=${{ inputs.arch }} GXDE_CROSS_ARCH=${{ inputs.gxde-cross-arch }} GO111MODULE=off \
+              DEBIAN_FRONTEND=noninteractive \
              dpkg-buildpackage -b
          else
            env gitPath=$gitPath bash .github/workflows/run-command-in-chroot.sh \
              env GXDE_ARCH=${{ inputs.arch }} GXDE_CODENAME=${{ inputs.gxde-codename }} \
              GXDE_ARCH=${{ inputs.arch }} GXDE_CROSS_ARCH=${{ inputs.gxde-cross-arch }} GO111MODULE=off \
+              DEBIAN_FRONTEND=noninteractive \
              bash build-deb.sh
          fi
          cp $BOTTLEPATH/*.deb . -rv
@@ -116,6 +119,7 @@ jobs:
          echo -e "ls -1 | grep dbg_ | grep .deb | grep -v dtk | grep -v qt | grep -v dock | grep -v gxtk\nexit 0" | sudo tee remove-deb.sh
          removeDeb=$(bash remove-deb.sh)
          sudo rm -rf $removeDeb
+          sudo rm -rf linux-libc-dev_*_hetao.deb

      - name: Pack tar
        run: |
@@ -68,19 +68,6 @@ jobs:
    name: ${{ inputs.display-name || 'Build Job' }}
    runs-on: ubuntu-24.04
    steps:
-      # 由于默认的 Ubuntu 环境只有 17G 左右的剩余空间，所以我们需要先利用如下 action 对编译环境进行扩容
-      - name: Maximize build space
-        uses: easimon/maximize-build-space@master
-        with:
-          # 这个值是保留给系统的空间大小，之前设置太小，总会在安装依赖或者编译过程中报设备空间不足的错误而导致编译失败
-          root-reserve-mb: 4096
-          swap-size-mb: 512
-          remove-dotnet: 'true'
-          remove-docker-images: 'true'
-          remove-codeql: 'true'
-          remove-haskell: 'true'
-          remove-android: 'true'
-
      - name: Clone Repository To Get Script
        run: |
          #apt update
@@ -95,26 +82,30 @@ jobs:
            isBackport=backport
          fi
          export REPO_BRANCH=${{ github.ref_name }}
-          bash .github/workflows/configure-building-enviroment-base-system.sh ${{ inputs.arch }} \
+          env GXDE_ARCH=${{ inputs.arch }} GXDE_CROSS_ARCH=${{ inputs.gxde-cross-arch }} \
+            bash .github/workflows/configure-building-enviroment-base-system.sh ${{ inputs.arch }} \
            ${{ inputs.rootfs-codename }} \
            $REPOSITORY \
            https://github.com/$GITHUB_REPOSITORY \
            ${{ inputs.rootfs-source }} \
            ${{ github.ref_name }} \
+            ${{ inputs.gxde-codename-upload }} \
            $isBackport

      - name: Building ${{ GITHUB.repository }}
        run: |
-          gitPath=$(basename $GITHUB_REPOSITORY)
+          export gitPath=$(basename $GITHUB_REPOSITORY)
          if [[ -f system-bottle/$gitPath/debian/control ]]; then
            env gitPath=$gitPath bash .github/workflows/run-command-in-chroot.sh \
              env GXDE_ARCH=${{ inputs.arch }} GXDE_CODENAME=${{ inputs.gxde-codename }} \
              GXDE_ARCH=${{ inputs.arch }} GXDE_CROSS_ARCH=${{ inputs.gxde-cross-arch }} GO111MODULE=off \
+              DEBIAN_FRONTEND=noninteractive \
              dpkg-buildpackage -b
          else
            env gitPath=$gitPath bash .github/workflows/run-command-in-chroot.sh \
              env GXDE_ARCH=${{ inputs.arch }} GXDE_CODENAME=${{ inputs.gxde-codename }} \
              GXDE_ARCH=${{ inputs.arch }} GXDE_CROSS_ARCH=${{ inputs.gxde-cross-arch }} GO111MODULE=off \
+              DEBIAN_FRONTEND=noninteractive \
              bash build-deb.sh
          fi
          cp $BOTTLEPATH/*.deb . -rv
@@ -129,6 +120,7 @@ jobs:
          echo -e "ls -1 | grep dbg_ | grep .deb | grep -v dtk | grep -v qt | grep -v dock | grep -v gxtk\nexit 0" | sudo tee remove-deb.sh
          removeDeb=$(bash remove-deb.sh)
          sudo rm -rf $removeDeb
+          sudo rm -rf linux-libc-dev_*_hetao.deb

      - name: Pack tar
        run: |
@@ -0,0 +1,27 @@
+name: Building GXDE Testing Package
+run-name: Building ${{ GITHUB.REPOSITORY }}
+
+on:
+  workflow_call:
+    secrets:
+      PASSWD:
+        required: true
+      USERS:
+        required: true
+      HOST: 
+        required: true
+      UPATH: 
+        required: true
+      UPROGRAM: 
+        required: true
+      UPORT: 
+        required: true
+
+env:
+  REPOSITORY: https://github.com/GXDE-OS/GXDE  
+  BOTTLEPATH: system-bottle
+
+jobs:  
+  call-zhuangzhuang:
+    uses: GXDE-OS/GXDE/.github/workflows/building-deb-zhuangzhuang-cross-host.yml@master
+    secrets: inherit
@@ -25,15 +25,3 @@ jobs:
  call-zhuangzhuang:
    uses: GXDE-OS/GXDE/.github/workflows/building-deb-zhuangzhuang-cross.yml@master
    secrets: inherit
-  
-  call-hetao:
-    uses: GXDE-OS/GXDE/.github/workflows/building-deb-hetao-cross.yml@master
-    secrets: inherit
-  
-  call-tianlu:
-    uses: GXDE-OS/GXDE/.github/workflows/building-deb-tianlu-cross.yml@master
-    secrets: inherit
-
-  call-meimei:
-    uses: GXDE-OS/GXDE/.github/workflows/building-deb-meimei-cross.yml@master
-    secrets: inherit
@@ -0,0 +1,71 @@
+name: Building GXDE Package (hetao)
+run-name: Building ${{ GITHUB.REPOSITORY }}
+
+on:
+  workflow_call:
+    secrets:
+      PASSWD:
+        required: true
+      USERS:
+        required: true
+      HOST: 
+        required: true
+      UPATH: 
+        required: true
+      UPROGRAM: 
+        required: true
+      UPORT: 
+        required: true
+
+env:
+  REPOSITORY: https://github.com/GXDE-OS/GXDE  
+  BOTTLEPATH: system-bottle
+
+jobs:  
+  call-amd64-hetao:
+    uses: GXDE-OS/GXDE/.github/workflows/building-deb-base.yml@master
+    secrets: inherit
+    with:
+      display-name: amd64-hetao
+      arch: amd64
+      rootfs-codename: crimson
+      rootfs-source: https://mirrors.kernel.org/deepin/beige/
+      gxde-codename: hetao
+      gxde-codename-upload: hetao
+      gxde-cross-arch: amd64
+
+  call-arm64-hetao:
+    uses: GXDE-OS/GXDE/.github/workflows/building-deb-base.yml@master
+    secrets: inherit
+    with:
+      display-name: arm64-hetao
+      arch: arm64
+      rootfs-codename: crimson
+      rootfs-source: https://mirrors.kernel.org/deepin/beige/
+      gxde-codename: hetao
+      gxde-codename-upload: hetao
+      gxde-cross-arch: arm64
+
+  call-loong64-hetao:
+    uses: GXDE-OS/GXDE/.github/workflows/building-deb-base.yml@master
+    secrets: inherit
+    with:
+      display-name: loong64-hetao
+      arch: amd64
+      rootfs-codename: crimson
+      rootfs-source: https://mirrors.kernel.org/deepin/beige/
+      gxde-codename: hetao
+      gxde-codename-upload: hetao
+      gxde-cross-arch: loong64
+
+  call-riscv64-hetao:
+    uses: GXDE-OS/GXDE/.github/workflows/building-deb-base.yml@master
+    secrets: inherit
+    with:
+      display-name: riscv64-hetao
+      arch: amd64
+      rootfs-codename: crimson
+      rootfs-source: https://mirrors.kernel.org/deepin/beige/
+      gxde-codename: hetao
+      gxde-codename-upload: hetao
+      gxde-cross-arch: riscv64
@@ -28,7 +28,7 @@ jobs:
    with:
      display-name: loong64-meimei
      arch: loong64
-      rootfs-codename: loongnix-stable
-      rootfs-source: https://pkg.loongnix.cn/loongnix/25
+      rootfs-codename: trixie
+      rootfs-source: http://loong13.debian.net/debian-loong64/
      gxde-codename: meimei
      gxde-codename-upload: meimei
@@ -0,0 +1,83 @@
+name: Building GXDE Testing Package (zhuangzhuang)
+run-name: Building ${{ GITHUB.REPOSITORY }}
+
+on:
+  workflow_call:
+    secrets:
+      PASSWD:
+        required: true
+      USERS:
+        required: true
+      HOST: 
+        required: true
+      UPATH: 
+        required: true
+      UPROGRAM: 
+        required: true
+      UPORT: 
+        required: true
+
+env:
+  REPOSITORY: https://github.com/GXDE-OS/GXDE  
+  BOTTLEPATH: system-bottle
+
+jobs:  
+  call-i386-zhuangzhuang:
+    uses: GXDE-OS/GXDE/.github/workflows/building-deb-base.yml@master
+    secrets: inherit
+    with:
+      display-name: i386-zhuangzhuang
+      arch: i386
+      rootfs-codename: trixie
+      rootfs-source: https://deb.debian.org/debian/
+      gxde-codename: lizhi
+      gxde-codename-upload: zhuangzhuang
+      gxde-cross-arch: i386
+
+  call-amd64-zhuangzhuang:
+    uses: GXDE-OS/GXDE/.github/workflows/building-deb-base.yml@master
+    secrets: inherit
+    with:
+      display-name: amd64-zhuangzhuang
+      arch: amd64
+      rootfs-codename: trixie
+      rootfs-source: https://deb.debian.org/debian/
+      gxde-codename: lizhi
+      gxde-codename-upload: zhuangzhuang
+      gxde-cross-arch: amd64
+
+  call-arm64-zhuangzhuang:
+    uses: GXDE-OS/GXDE/.github/workflows/building-deb-base.yml@master
+    secrets: inherit
+    with:
+      display-name: arm64-zhuangzhuang
+      arch: arm64
+      rootfs-codename: trixie
+      rootfs-source: https://deb.debian.org/debian/
+      gxde-codename: lizhi
+      gxde-codename-upload: zhuangzhuang
+      gxde-cross-arch: arm64
+
+  call-riscv64-zhuangzhuang:
+    uses: GXDE-OS/GXDE/.github/workflows/building-deb-base.yml@master
+    secrets: inherit
+    with:
+      display-name: riscv64-zhuangzhuang
+      arch: amd64
+      rootfs-codename: trixie
+      rootfs-source: https://deb.debian.org/debian/
+      gxde-codename: lizhi
+      gxde-codename-upload: zhuangzhuang
+      gxde-cross-arch: riscv64
+
+  call-loong64-zhuangzhuang:
+    uses: GXDE-OS/GXDE/.github/workflows/building-deb-base.yml@master
+    secrets: inherit
+    with:
+      display-name: loong64-zhuangzhuang
+      arch: amd64
+      rootfs-codename: trixie
+      rootfs-source: https://deb.debian.org/debian/
+      gxde-codename: lizhi
+      gxde-codename-upload: zhuangzhuang
+      gxde-cross-arch: loong64
@@ -22,6 +22,18 @@ env:
  BOTTLEPATH: system-bottle

 jobs:  
+  call-i386-zhuangzhuang:
+    uses: GXDE-OS/GXDE/.github/workflows/building-deb-base.yml@master
+    secrets: inherit
+    with:
+      display-name: i386-zhuangzhuang
+      arch: i386
+      rootfs-codename: trixie
+      rootfs-source: https://deb.debian.org/debian/
+      gxde-codename: lizhi
+      gxde-codename-upload: zhuangzhuang
+      gxde-cross-arch: i386
+
  call-amd64-zhuangzhuang:
    uses: GXDE-OS/GXDE/.github/workflows/building-deb-base.yml@master
    secrets: inherit
@@ -57,3 +69,15 @@ jobs:
      gxde-codename: lizhi
      gxde-codename-upload: zhuangzhuang
      gxde-cross-arch: riscv64
+
+  call-loong64-zhuangzhuang:
+    uses: GXDE-OS/GXDE/.github/workflows/building-deb-base.yml@master
+    secrets: inherit
+    with:
+      display-name: loong64-zhuangzhuang
+      arch: amd64
+      rootfs-codename: trixie
+      rootfs-source: https://deb.debian.org/debian/
+      gxde-codename: lizhi
+      gxde-codename-upload: zhuangzhuang
+      gxde-cross-arch: loong64
@@ -22,6 +22,17 @@ env:
  BOTTLEPATH: system-bottle

 jobs:  
+  call-i386-zhuangzhuang:
+    uses: GXDE-OS/GXDE/.github/workflows/building-deb-base.yml@master
+    secrets: inherit
+    with:
+      display-name: i386-zhuangzhuang
+      arch: i386
+      rootfs-codename: trixie
+      rootfs-source: https://deb.debian.org/debian/
+      gxde-codename: lizhi
+      gxde-codename-upload: zhuangzhuang
+
  call-amd64-zhuangzhuang:
    uses: GXDE-OS/GXDE/.github/workflows/building-deb-base.yml@master
    secrets: inherit
@@ -54,3 +65,14 @@ jobs:
      rootfs-source: https://deb.debian.org/debian/
      gxde-codename: lizhi
      gxde-codename-upload: zhuangzhuang
+
+  call-loong64-zhuangzhuang:
+    uses: GXDE-OS/GXDE/.github/workflows/building-deb-base.yml@master
+    secrets: inherit
+    with:
+      display-name: loong64-zhuangzhuang
+      arch: loong64
+      rootfs-codename: trixie
+      rootfs-source: http://loong13.debian.net/debian-loong64/
+      gxde-codename: lizhi
+      gxde-codename-upload: zhuangzhuang
@@ -25,12 +25,8 @@ jobs:
  call-zhuangzhuang:
    uses: GXDE-OS/GXDE/.github/workflows/building-deb-zhuangzhuang.yml@master
    secrets: inherit
-
-  call-meimei:
-    uses: GXDE-OS/GXDE/.github/workflows/building-deb-meimei.yml@master
-    secrets: inherit
-  
-  call-hetao:
-    uses: GXDE-OS/GXDE/.github/workflows/building-deb-hetao.yml@master
+  
+  call-arch:
+    uses: GXDE-OS/GXDE/.github/workflows/building-pkg.yml@master
    secrets: inherit
  
@@ -0,0 +1,138 @@
+# Copyright (C) 2026 CharOfString <root@charofstring.cc>
+#
+# This program is free software: you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation, either version 3 of the License, or (at your option) any later
+# version.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program. If not, see <https://www.gnu.org/licenses/>.
+# -----------------------------------------------------------------------------
+# 本工作流用于构建Archlinux软件包，仅接受根目录的PKGBUILD或arch/PKGBUILD，没有时跳过。
+# This workflow is used to build Arch Linux packages, it only accepts PKGBUILD
+# in the root directory of the repo or arch/PKGBUILD, otherwise this will be
+# skipped.
+
+name: Building GXDE Arch Package
+
+on:
+  workflow_call:
+    secrets:
+      PASSWD:
+        required: true
+      USERS:
+        required: true
+      HOST:
+        required: true
+      UPATH:
+        required: true
+      UPORT:
+        required: true
+      UPROGRAM_ARCH:
+        required: false
+
+env:
+  REPOSITORY: https://github.com/GXDE-OS/GXDE
+  BOTTLEPATH: system-bottle
+  GXDE_ARCH_REPO: https://repo1.gxde.top/gxde-arch
+
+jobs:
+  detect:
+    if: github.repository_owner == 'GXDE-OS'
+    runs-on: ubuntu-24.04
+    outputs:
+      pkgbuild-dir: ${{ steps.find.outputs.dir }}
+    steps:
+      - uses: actions/checkout@v4
+      - name: Find PKGBUILD
+        id: find
+        run: |
+          if [[ -f arch/PKGBUILD ]]; then
+            echo "dir=arch" >> $GITHUB_OUTPUT
+          elif [[ -f PKGBUILD ]]; then
+            echo "dir=." >> $GITHUB_OUTPUT
+          else
+            echo "No PKGBUILD found, skip Arch build"
+          fi
+
+  build:
+    needs: detect
+    if: needs.detect.outputs.pkgbuild-dir != ''
+    name: ${{ matrix.arch }}-arch
+    runs-on: ${{ matrix.runner }}
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - arch: x86_64
+            runner: ubuntu-24.04
+          - arch: aarch64
+            runner: ubuntu-24.04-arm
+    steps:
+      - name: Clone Repository To Get Script
+        run: |
+          git clone $REPOSITORY --depth=1
+          mv $(basename $REPOSITORY)/* . -v
+          mv $(basename $REPOSITORY)/.* . -v | true
+
+      - name: Configure Base System
+        run: |
+          bash .github/workflows/configure-building-enviroment-arch.sh ${{ matrix.arch }} \
+            $REPOSITORY \
+            https://github.com/$GITHUB_REPOSITORY \
+            ${{ github.ref_name }} \
+            $GXDE_ARCH_REPO
+
+      - name: Building ${{ GITHUB.repository }}
+        run: |
+          gitPath=/home/builder/$(basename $GITHUB_REPOSITORY)/${{ needs.detect.outputs.pkgbuild-dir }}
+          sudo chroot $BOTTLEPATH sudo -H -u builder bash -c \
+            "cd $gitPath && makepkg -s --noconfirm --needed"
+          mkdir -p packages
+          sudo find $BOTTLEPATH$gitPath -maxdepth 1 -name '*.pkg.tar.*' ! -name '*.sig' -exec cp -v {} packages/ \;
+          sudo chown -R $(id -u):$(id -g) packages
+          ls -l packages
+
+      - name: Remove Debug Package
+        run: |
+          rm -fv packages/*-debug-*.pkg.tar.*
+
+      - name: Pack tar
+        run: |
+          cd packages
+          tar -cvf ../arch-${{ matrix.arch }}-$(date +%s).tar *.pkg.tar.*
+
+      - name: Push
+        env:
+          UPASSWD: ${{ secrets.PASSWD }}
+          UUSERS: ${{ secrets.USERS }}
+          UHOST: ${{ secrets.HOST }}
+          UPATH: ${{ secrets.UPATH }}
+          UPROGRAM_ARCH: ${{ secrets.UPROGRAM_ARCH }}
+          UPORT: ${{ secrets.UPORT }}
+        run: |
+          if [[ -z "$UPROGRAM_ARCH" ]]; then
+            echo "::warning::UPROGRAM_ARCH is not set, skip uploading Arch packages"
+            exit 0
+          fi
+          sudo apt update
+          sudo apt install sshpass -y
+          mkdir -p ~/.ssh/
+          ssh-keyscan -p $UPORT -H $UHOST >> ~/.ssh/known_hosts
+          tarName=$(ls | grep '^arch-.*\.tar$' | head -n 1)
+          sshpass -p "$UPASSWD" rsync -e "ssh -p $UPORT" $tarName $UUSERS@$UHOST:$UPATH
+          sshpass -p "$UPASSWD" ssh $UUSERS@$UHOST -p $UPORT $UPROGRAM_ARCH ${{ matrix.arch }} $UPATH/$tarName > /dev/null
+
+      - name: Create Release
+        uses: softprops/action-gh-release@v1
+        if: startsWith(github.ref, 'refs/tags/')
+        env:
+          GITHUB_TOKEN: ${{ secrets.RELEASE_TOCKEN_GITHUB }}
+        with:
+          files: |
+            packages/*.pkg.tar.*
@@ -0,0 +1,148 @@
+#!/bin/bash
+
+# Copyright (C) 2026 CharOfString <root@charofstring.cc>
+#
+# This program is free software: you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation, either version 3 of the License, or (at your option) any later
+# version.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program. If not, see <https://www.gnu.org/licenses/>.
+# -----------------------------------------------------------------------------
+# 本脚本用于构建GXDE Arch打包环境
+#   参数$1 = 架构，可选x86_64/aarch64
+#   参数$2 = GXDE仓库地址
+#   参数$3 = 源码包仓库地址
+#   参数$4 = 当前欲构建的分支
+#   参数$5 = GXDE Arch源地址，用于获取GXDE依赖
+# -----------------------------------------------------------------------------
+# This script is used to configure the packaging environment of GXDE on Arch.
+#   $1 = Archtecture required, either x86_64 or aarch64.
+#   $2 = GXDE repository address.
+#   $3 = Repository path of the software to be built.
+#   $4 = The branch that you want to build.
+#   $5 = The Arch PACMAN source of GXDE, we'll use it to install dependencies.
+
+set -e
+build_arch=$1
+bottle_path=./system-bottle
+gxde_arch_repo=${5:-https://repo1.gxde.top/gxde-arch}
+
+# 引用/Works Cited: https://patorjk.com/software/taag/#p=display&f=Linguaholic+Shadow+3D
+echo '  ██████╗██╗     ██╗██████╗  ████████╗           ████╗                     ' &&
+echo '██╔═════╝╚═██╗ ██╔═╝██╔═══██╗██╔═════╝         ██╔═══╝  ████╗  ██╗ ████╗   ' &&
+echo '██║ ████╗  ╚═██╔═╝  ██║   ██║██████╗         ██████╗  ██╔═══██╗████╔═══╝   ' &&
+echo '██║ ╚═██║  ██╔═██╗  ██║   ██║██╔═══╝         ╚═██╔═╝  ██║   ██║██╔═╝       ' &&
+echo '╚═██████║██╔═╝ ╚═██╗██████╔═╝████████╗         ██║    ╚═████╔═╝██║         ' &&
+echo '  ╚═════╝╚═╝     ╚═╝╚═════╝  ╚═══════╝         ╚═╝      ╚═══╝  ╚═╝         ' &&
+echo '                                                                           ' &&
+echo '                                                                           ' &&
+echo '  ████╗                    ██╗      ██╗      ██╗                           ' &&
+echo '██╔═══██╗██╗ ████╗  ██████╗██████╗  ██║      ╚═╝██████╗  ██╗   ██╗██╗   ██╗' &&
+echo '████████║████╔═══╝██╔═════╝██╔═══██╗██║      ██╗██╔═══██╗██║   ██║╚═████╔═╝' &&
+echo '██╔═══██║██╔═╝    ██║      ██║   ██║██║      ██║██║   ██║██║   ██║  ████║  ' &&
+echo '██║   ██║██║      ╚═██████╗██║   ██║████████╗██║██║   ██║╚═██████║██╔═══██╗' &&
+echo '╚═╝   ╚═╝╚═╝        ╚═════╝╚═╝   ╚═╝╚═══════╝╚═╝╚═╝   ╚═╝  ╚═════╝╚═╝   ╚═╝'
+
+# 先安装解压chroot用的依赖 ・ Install the dependencies for extracting chroot first.
+sudo apt update
+sudo apt install wget zstd git -y
+
+# 根据架构下载解压对应chroot ・ Download & extract corresponding chroot by archtecture needed.
+echo '[I] (Chroot) Init: Starting to download chroot for Archlinux...'
+if [[ $build_arch == "x86_64" ]]; then
+    echo '[I] (Chroot) Init: Archtecture hit >> AMD64.'
+    wget -q https://geo.mirror.pkgbuild.com/iso/latest/archlinux-bootstrap-x86_64.tar.zst
+    sudo tar --zstd -xpf archlinux-bootstrap-x86_64.tar.zst --numeric-owner
+    sudo mv root.x86_64 $bottle_path
+    echo 'Server = https://geo.mirror.pkgbuild.com/$repo/os/$arch' | sudo tee $bottle_path/etc/pacman.d/mirrorlist
+    keyring=archlinux
+elif [[ $build_arch == "aarch64" ]]; then
+    echo '[I] (Chroot) Init: Archtecture hit >> AARCH64.'
+    wget -q http://os.archlinuxarm.org/os/ArchLinuxARM-aarch64-latest.tar.gz
+    sudo mkdir -p $bottle_path
+    sudo tar -xpf ArchLinuxARM-aarch64-latest.tar.gz -C $bottle_path --numeric-owner
+    keyring=archlinuxarm
+else
+    echo "[E] (Chroot) Init: Unsupportted archtecture $build_arch, HALTED!"
+    exit 1
+fi
+echo '[I] (Chroot) Init: Done downloading chroot for Archlinux.'
+
+# 挂载chroot ・ Mount chroot.
+echo '[I] (Chroot) Mount: Starting to mount target chroot...'
+sudo mount --bind $bottle_path $bottle_path
+for i in proc sys dev dev/pts; do
+    sudo mount --bind /$i $bottle_path/$i
+done
+# ALARM的resolv.conf是指向/run/systemd/resolve的绝对软链接，需先删除，否则cp会写穿到宿主机且chroot内仍无法解析
+# ALARM ships resolv.conf as an absolute symlink into /run/systemd/resolve, remove it first,
+# otherwise cp writes through to the host's file and DNS stays broken inside chroot.
+sudo rm -f $bottle_path/etc/resolv.conf
+sudo cp -L /etc/resolv.conf $bottle_path/etc/resolv.conf
+echo '[I] (Chroot) Mount: Done mounting the chroot!'
+
+# Pacman在chroot里无法做沙箱/空间检查
+# Pacman is not able to do space check or sandbox in chroot.
+echo '[I] (Chroot) PostInit: Disabling sanbox and space check since we are in chroot...'
+sudo sed -i 's/^CheckSpace/#CheckSpace/' $bottle_path/etc/pacman.conf
+sudo sed -i 's/^#DisableSandbox/DisableSandbox/' $bottle_path/etc/pacman.conf
+echo '[I] (Chroot) PostInit: Done disabling unavailable components!'
+
+# 一个小wrapper，在chroot中运行某指令 ・ A wrapper to run certain commands under chroot.
+run() {
+    sudo chroot $bottle_path bash -c "$*"
+}
+
+# 写入GXDE Arch源，以便安装dtk等自身提供的依赖
+# 新源刚建立时可能还不存在，因此只做可选信任
+# --------------------------------------------
+# Add GXDE Archlinux PACMAN source to install dependencies such as DTK.
+# It may not exist when as we're just getting started, so we will do a Optional TrustAll.
+echo '[I] (Chroot) PACMAN: Configuring GXDE pacman source...'
+cat << EOF | sudo tee -a $bottle_path/etc/pacman.conf
+
+[gxde]
+SigLevel = Optional TrustAll
+Server = $gxde_arch_repo/\$arch
+EOF
+echo '[I] (Chroot) PACMAN: GXDE pacman source has been added to chroot!'
+echo '[I] (Chroot) PACMAN: Doing upgrade...'
+run pacman-key --init
+run pacman-key --populate $keyring
+for i in {1..5}; do
+    # GXDE 源尚不存在时 -Syu 会失败，此时去掉 GXDE 源再试一次
+    if run pacman -Syu --noconfirm --needed base-devel git sudo; then
+        break
+    fi
+    if [[ $i == 3 ]]; then
+        echo "GXDE Arch repo unreachable, building without it"
+        sudo sed -i '/^\[gxde\]/,/^Server/d' $bottle_path/etc/pacman.conf
+    fi
+    if [[ $i == 5 ]]; then
+        echo '[E] (Chroot) PACMAN: Failed to upgrade chroot, HALTED!'
+        exit 1
+    fi
+    sleep 2
+done
+echo '[I] (Chroot) PACMAN: Shall be okay...'
+
+# makepkg不允许以root运行 ・ makepkg require another account other than root.
+echo '[I] (Building) AccountCtl: Setting up builder account...'
+run useradd -m builder
+echo "builder ALL=(ALL) NOPASSWD: ALL" | sudo tee $bottle_path/etc/sudoers.d/builder
+echo '[I] (Building) AccountCtl: Builder account is up!'
+
+# 以builder身份克隆仓库 ・ Clone the repo as builder.
+echo '[I] (Building) Builder: Cloning target repository...'
+run sudo -H -u builder git clone $3 -b $4 /home/builder/$(basename $3)
+echo '[I] (Building) Builder: Done cloning target repository.'
+
+echo '[I] (Env) Setup: Setup finished, bye~'
+exit 0
@@ -39,7 +39,7 @@ if [[ $2 == "crimson" ]]; then
    useDeepin25
    sudo debootstrap --no-check-gpg --include=git,deepin-keyring,gcc,make,g++,dpkg-dev,qtbase5-dev,ca-certificates --arch=$1 $2 $bottlePath $5
 else
-    sudo debootstrap --no-check-gpg --include=git,gcc,make,debian-ports-archive-keyring,debian-archive-keyring,g++,dpkg-dev,qtbase5-dev,ca-certificates --arch=$1 $2 $bottlePath $5
+    sudo debootstrap --no-check-gpg --include=git,gcc,make,debian-ports-archive-keyring,debian-archive-keyring,g++,dpkg-dev,qtbase5-dev,ca-certificates,qt6-base-private-dev,qt6-base-dev --arch=$1 $2 $bottlePath $5
 fi

 if [[ $2 == "crimson" ]]; then
@@ -56,12 +56,14 @@ if [[ $? != 0 ]] && [[ $1 == loong64 ]] && [[ $2 != "loongnix" ]]; then
    sudo mv squashfs-root $bottlePath -v
 fi
 sudo bash .github/workflows/pardus-chroot $bottlePath
-if [[ $7 == "backport" ]]; then
+if [[ $8 == "backport" ]]; then
    sudo cp -rv .github/workflows/debian-backports.list $bottlePath/etc/apt/sources.list.d
    sudo mkdir -p $bottlePath/etc/apt/preferences.d/
    sudo cp -rv .github/workflows/90bookworm-backports $bottlePath/etc/apt/preferences.d/
-    echo "deb [trusted=true] https://repo.gxde.top/gxde-os/tianlu-bpo ./" >> $bottlePath/etc/apt/sources.list.d/gxde-os-bpo.list
+    echo "deb [trusted=true] https://repo1.gxde.top/gxde-os/tianlu-bpo ./" >> $bottlePath/etc/apt/sources.list.d/gxde-os-bpo.list
 fi
+sudo mkdir -p $bottlePath/sources-list
+sudo cp -v .github/workflows/sources-*.list $bottlePath/sources-list
 # 配置 git
 #echo "deb [trusted=true] https://deb.debian.org/debian-ports/ unreleased main" | sudo tee $bottlePath/etc/apt/sources.list.d/debian-unreleased.list
 sudo chroot $bottlePath apt update
@@ -72,22 +74,6 @@ sudo chroot $bottlePath git clone $4 -b $6 #--depth=1
 sudo mv $bottlePath/$(basename $3)/.github/workflows/* $bottlePath/$(basename $4)/.github/workflows -v
 # 修改版本号
 #sudo sed -i "s/) UNRELEASED; urgency=medium/~$2) UNRELEASED; urgency=medium/g" $bottlePath/deep-wine-runner-qemu-system/debian/changelog
-case $2 in
-    "trixie")
-        env gitPath=$(basename $4) bash .github/workflows/run-command-in-chroot.sh .github/workflows/configure-building-enviroment.sh zhuangzhuang
-    ;;
-    "sid")
-        env gitPath=$(basename $4) bash .github/workflows/run-command-in-chroot.sh .github/workflows/configure-building-enviroment.sh zhuangzhuang
-    ;;
-    "loongnix-stable")
-        env gitPath=$(basename $4) bash .github/workflows/run-command-in-chroot.sh .github/workflows/configure-building-enviroment.sh meimei
-    ;;
-    "crimson")
-        env gitPath=$(basename $4) bash .github/workflows/run-command-in-chroot.sh .github/workflows/configure-building-enviroment.sh hetao
-    ;;
-    *)
-        env gitPath=$(basename $4) bash .github/workflows/run-command-in-chroot.sh .github/workflows/configure-building-enviroment.sh
-    ;;
-esac
+env gitPath=$(basename $4) bash .github/workflows/run-command-in-chroot.sh .github/workflows/configure-building-enviroment.sh $7 $GXDE_CROSS_ARCH

 exit 0
@@ -1,5 +1,6 @@
 #!/bin/bash
 export DEBIAN_FRONTEND=noninteractive  # 防止卡 tzdate
+GXDE_CROSS_ARCH=$2
 #mkdir -p /etc/apt/sources.list.d/
 #cp /etc/apt/sources.list /etc/apt/sources.list.d/sources.list
 #sed -i "s/deb /deb-src /g" /etc/apt/sources.list.d/sources.list
@@ -20,19 +21,31 @@ export DEBIAN_FRONTEND=noninteractive  # 防止卡 tzdate


 if [[ $1 == "" ]] || [[ $1 == "tianlu" ]]; then
-    echo "deb [trusted=true] https://repo.gxde.top/gxde-os/tianlu ./" >> /etc/apt/sources.list.d/gxde-os.list
-    echo "deb [trusted=true] https://repo.gxde.top/gxde-os/bixie ./" >> /etc/apt/sources.list.d/gxde-os.list
+    echo "deb [trusted=true] https://repo1.gxde.top/gxde-os/tianlu ./" >> /etc/apt/sources.list.d/gxde-os.list
+    echo "deb [trusted=true] https://repo1.gxde.top/gxde-os/bixie ./" >> /etc/apt/sources.list.d/gxde-os.list
 elif [[ $1 == "zhuangzhuang" ]];then
-    echo "deb [trusted=true] https://repo.gxde.top/gxde-os/zhuangzhuang ./" >> /etc/apt/sources.list.d/gxde-os.list
-    echo "deb [trusted=true] https://repo.gxde.top/gxde-os/lizhi ./" >> /etc/apt/sources.list.d/gxde-os.list
+    echo "deb [trusted=true] https://repo1.gxde.top/gxde-os/zhuangzhuang ./" >> /etc/apt/sources.list.d/gxde-os.list
+    echo "deb [trusted=true] https://repo1.gxde.top/gxde-os/lizhi ./" >> /etc/apt/sources.list.d/gxde-os.list
 else
-    echo "deb [trusted=true] https://repo.gxde.top/gxde-os/$1 ./" >> /etc/apt/sources.list.d/gxde-os.list
+    echo "deb [trusted=true] https://repo1.gxde.top/gxde-os/$1 ./" >> /etc/apt/sources.list.d/gxde-os.list
 fi
 #if [[ $(dpkg --print-architecture) == "loong64" ]]; then
 #    echo "deb [trusted=true] https://deb.debian.org/debian-ports/ unreleased main" > /etc/apt/sources.list.d/debian-unreleased.list
 #fi
 apt install -f -y
-apt install debian-ports-archive-keyring debian-archive-keyring -y
+apt install debian-ports-archive-keyring debian-archive-keyring wget -y
+if [[ -f /sources-list/sources-$1.list ]]; then
+    if [[ $(dpkg --print-architecture) == "riscv64" ]] || [[ $GXDE_CROSS_ARCH == "riscv64" ]]; then
+        cp /sources-list/sources-$1-without-backport.list /etc/apt/sources.list.d -v
+    else
+        if [[ $(dpkg --print-architecture) == "loong64" ]] || [[ $GXDE_CROSS_ARCH == "loong64" ]]; then
+            cp /sources-list/sources-$1-loong64.list /etc/apt/sources.list.d -v
+            wget -O /etc/apt/trusted.gpg.d/debian-trixie-loong64.gpg https://loong13.debian.net/keyrings/debian-trixie-loong64.gpg
+        else
+            cp /sources-list/sources-$1.list /etc/apt/sources.list.d -v
+        fi
+    fi
+fi
 for i in {1..8};
 do
    apt update -o Acquire::Check-Valid-Until=false -y
@@ -41,7 +54,7 @@ do
    fi
    sleep 1
 done
-apt install dpkg-dev sudo debian-ports-archive-keyring debian-archive-keyring devscripts -y
+apt install wget curl dpkg-dev sudo debian-ports-archive-keyring debian-archive-keyring devscripts -y
 #neofetch
 #if [[ `arch` != "x86_64" ]]; then
 #    apt source qemu
@@ -59,6 +72,7 @@ apt install dpkg-dev sudo debian-ports-archive-keyring debian-archive-keyring de
 # 如果是 Debian10 就需要安装 Python3 的依赖
 #apt build-dep python3.7 -y
 # 解包 gxde-desktop-base
+
 apt download gxde-desktop-base
 dpkg -x gxde-desktop-base_*.deb /
 rm gxde-desktop-base_*.deb -rfv
@@ -74,4 +88,48 @@ do
    fi
    sleep 1
 done
+# 从上游拉源代码
+# 从上游拉源代码
+./debian/rules get-orig-source
+
+# 收集当前目录和上层目录的所有 .tar* 文件
+tar_files=()
+if compgen -G "./*.tar*" > /dev/null; then
+    tar_files+=( ./*.tar* )
+fi
+if compgen -G "../*.tar*" > /dev/null; then
+    tar_files+=( ../*.tar* )
+fi
+
+# 如果找到 tar 文件，则逐个处理
+if [ ${#tar_files[@]} -gt 0 ]; then
+    for archive in "${tar_files[@]}"; do
+        filename=$(basename "$archive")
+        echo "处理: $archive"
+
+        # 确定目标目录
+        target_dir="."
+        if [[ "$filename" =~ -(amd64|arm64)\.tar ]]; then
+            arch="${BASH_REMATCH[1]}"
+            target_dir="./$arch"
+            echo "  架构: $arch → 目标目录: $target_dir"
+        else
+            echo "  通用包 → 目标目录: 当前目录"
+        fi
+
+        mkdir -p "$target_dir"
+
+        # 直接解压到目标目录，去除顶层目录
+        if tar -xzvf "$archive" -C "$target_dir" --strip-components=1; then
+            echo "  完成: 内容已解压至 $target_dir"
+            # （可选）解压成功后删除原始 tar 文件
+            # rm "$archive"
+        else
+            echo "  错误: 解压 $archive 失败，保留原始文件。"
+        fi
+    done
+else
+    echo "未找到任何 .tar* 文件，跳过解压步骤。"
+fi
+
 exit 0
@@ -0,0 +1,10 @@
+# 默认注释了源码镜像以提高 apt update 速度，如有需要可自行取消注释
+deb https://deb.debian.org/debian/ bookworm main contrib non-free non-free-firmware
+deb-src https://deb.debian.org/debian/ bookworm main contrib non-free non-free-firmware
+
+deb https://deb.debian.org/debian/ bookworm-updates main contrib non-free non-free-firmware
+deb-src https://deb.debian.org/debian/ bookworm-updates main contrib non-free non-free-firmware
+
+# 以下安全更新软件源包含了官方源与镜像站配置，如有需要可自行修改注释切换
+deb https://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
+deb-src https://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
@@ -0,0 +1,25 @@
+deb http://loong13.debian.net/debian-loong64/ trixie main contrib non-free non-free-firmware
+deb-src http://loong13.debian.net/debian-loong64/ trixie main contrib non-free non-free-firmware
+
+deb http://loong13.debian.net/debian-loong64/ trixie-updates main contrib non-free non-free-firmware
+deb-src http://loong13.debian.net/debian-loong64/ trixie-updates main contrib non-free non-free-firmware
+
+deb http://loong13.debian.net/debian-loong64/ trixie-backports main contrib non-free non-free-firmware
+deb-src http://loong13.debian.net/debian-loong64/ trixie-backports main contrib non-free non-free-firmware
+
+deb http://loong13.debian.net/debian-loong64-security/ trixie-security main contrib non-free non-free-firmware
+deb-src http://loong13.debian.net/debian-loong64-security/ trixie-security main contrib non-free non-free-firmware
+
+# 默认注释了源码镜像以提高 apt update 速度，如有需要可自行取消注释
+deb https://deb.debian.org/debian/ trixie main contrib non-free non-free-firmware
+deb-src https://deb.debian.org/debian/ trixie main contrib non-free non-free-firmware
+
+deb https://deb.debian.org/debian/ trixie-updates main contrib non-free non-free-firmware
+deb-src https://deb.debian.org/debian/ trixie-updates main contrib non-free non-free-firmware
+
+deb https://deb.debian.org/debian/ trixie-backports main contrib non-free non-free-firmware
+deb-src https://deb.debian.org/debian/ trixie-backports main contrib non-free non-free-firmware
+
+# 以下安全更新软件源包含了官方源与镜像站配置，如有需要可自行修改注释切换
+deb https://security.debian.org/debian-security trixie-security main contrib non-free non-free-firmware
+deb-src https://security.debian.org/debian-security trixie-security main contrib non-free non-free-firmware
@@ -0,0 +1,25 @@
+deb [trusted=true] http://loong13.debian.net/debian-loong64/ trixie main contrib non-free non-free-firmware
+deb-src [trusted=true] http://loong13.debian.net/debian-loong64/ trixie main contrib non-free non-free-firmware
+
+deb [trusted=true] http://loong13.debian.net/debian-loong64/ trixie-updates main contrib non-free non-free-firmware
+deb-src [trusted=true] http://loong13.debian.net/debian-loong64/ trixie-updates main contrib non-free non-free-firmware
+
+deb [trusted=true] http://loong13.debian.net/debian-loong64/ trixie-backports main contrib non-free non-free-firmware
+deb-src [trusted=true] http://loong13.debian.net/debian-loong64/ trixie-backports main contrib non-free non-free-firmware
+
+deb [trusted=true] http://loong13.debian.net/debian-loong64-security/ trixie-security main contrib non-free non-free-firmware
+deb-src [trusted=true] http://loong13.debian.net/debian-loong64-security/ trixie-security main contrib non-free non-free-firmware
+
+# 默认注释了源码镜像以提高 apt update 速度，如有需要可自行取消注释
+deb https://deb.debian.org/debian/ trixie main contrib non-free non-free-firmware
+deb-src https://deb.debian.org/debian/ trixie main contrib non-free non-free-firmware
+
+deb https://deb.debian.org/debian/ trixie-updates main contrib non-free non-free-firmware
+deb-src https://deb.debian.org/debian/ trixie-updates main contrib non-free non-free-firmware
+
+deb https://deb.debian.org/debian/ trixie-backports main contrib non-free non-free-firmware
+deb-src https://deb.debian.org/debian/ trixie-backports main contrib non-free non-free-firmware
+
+# 以下安全更新软件源包含了官方源与镜像站配置，如有需要可自行修改注释切换
+deb https://security.debian.org/debian-security trixie-security main contrib non-free non-free-firmware
+deb-src https://security.debian.org/debian-security trixie-security main contrib non-free non-free-firmware
@@ -0,0 +1,10 @@
+# 默认注释了源码镜像以提高 apt update 速度，如有需要可自行取消注释
+deb https://deb.debian.org/debian/ trixie main contrib non-free non-free-firmware
+# deb-src https://deb.debian.org/debian/ trixie main contrib non-free non-free-firmware
+
+deb https://deb.debian.org/debian/ trixie-updates main contrib non-free non-free-firmware
+# deb-src https://deb.debian.org/debian/ trixie-updates main contrib non-free non-free-firmware
+
+# 以下安全更新软件源包含了官方源与镜像站配置，如有需要可自行修改注释切换
+deb https://security.debian.org/debian-security trixie-security main contrib non-free non-free-firmware
+# deb-src https://security.debian.org/debian-security trixie-security main contrib non-free non-free-firmware
@@ -0,0 +1,13 @@
+# 默认注释了源码镜像以提高 apt update 速度，如有需要可自行取消注释
+deb https://deb.debian.org/debian/ trixie main contrib non-free non-free-firmware
+deb-src https://deb.debian.org/debian/ trixie main contrib non-free non-free-firmware
+
+deb https://deb.debian.org/debian/ trixie-updates main contrib non-free non-free-firmware
+deb-src https://deb.debian.org/debian/ trixie-updates main contrib non-free non-free-firmware
+
+deb https://deb.debian.org/debian/ trixie-backports main contrib non-free non-free-firmware
+deb-src https://deb.debian.org/debian/ trixie-backports main contrib non-free non-free-firmware
+
+# 以下安全更新软件源包含了官方源与镜像站配置，如有需要可自行修改注释切换
+deb https://security.debian.org/debian-security trixie-security main contrib non-free non-free-firmware
+deb-src https://security.debian.org/debian-security trixie-security main contrib non-free non-free-firmware
@@ -16,17 +16,15 @@ jobs:
      - name: Config
        run: |
          sudo apt update
-          sudo apt install git python3-requests -y
+          sudo apt install git -y

      - name: Push
        env: 
          GITHUBTOKEN: ${{ secrets.GITHUBTOKEN }}
          GITHUBUSER: ${{ secrets.GITHUBUSER }}
-          GITCODETOKEN: ${{ secrets.GITCODETOKEN }}
-          GITCODEUSER: ${{ secrets.GITCODEUSER }}
-          ATOMGITTOKEN: ${{ secrets.ATOMGITTOKEN }}
-          ATOMGITUSER: ${{ secrets.ATOMGITUSER }}
+          GITEEUSER: ${{ secrets.GITEEUSER }}
+          GITEETOCKEN: ${{ secrets.GITEETOCKEN }}
        run: |
          cd sync-gitee-to-github
-          python3 sync.py $GITHUBUSER $GITHUBTOKEN $GITCODEUSER $GITCODETOKEN $ATOMGITUSER $ATOMGITTOKEN
+          python3 sync.py $GITEEUSER $GITEETOCKEN $GITHUBUSER $GITHUBTOKEN

@@ -1,5 +1,6 @@
 This file contains honored contributers of GXDE and GXDE OS. The list is in alphabetical order. 

+CharOfString <root@charofstring.cc>
 dependon <liuminghang0821@gmail.com>
 elysia <c.elysia@foxmail.com>
 gfdgd xi <3025613752@qq.com>
@@ -1,9 +1,18 @@
+![HEADER](./readme-header.png)
+
+<div>
+<div style="float: left; display: flex; align-items: center" >
+<a href='https://gitee.com/GXDE-OS/GXDE/stargazers'><img src='https://gitee.com/GXDE-OS/GXDE/badge/star.svg?theme=dark' alt='star'></img></a>
+<img src='https://gitcode.com/GXDE-OS/GXDE/star/badge.svg' alt='G-Star'></img>
+</div>
+<div style="float: right">
+<a href="./README.zh.md">中文版</a>
+</div>
+</div>


 ## Welcome to GXDE OS Community 

-**[中文](/README.zh.md)**
-
 GXDE OS is an Debian based Linux distro featuring GXDE Desktop Environment. It offers an elegant, beautifu, light weight and out-of-the-box experience. 

 ### Classic and Extended Deepin DE Experience 
@@ -88,8 +97,7 @@ The author is online and hungry for support (nom nom~). Feeding might even get u

 <p><img src="https://www.gxde.top/install/gf.jpg" style="border-radius: 4px;" ></p>

-### Advertisement
-Scan to receive a payment red envelope from the Alipay official event!  
-<p><img src="Icon/QR/advertisement0.jpg" width="250" ></p>

-# ©2023～Now gfdgd xi
+<span style="color: #E6004C; font-size: 20px"><b>©2023～Now gfdgd xi</b></span>
+
+<div style="background: #E6004C; width: 100%; height: 3px;"></div>
@@ -1,11 +1,14 @@
-<center><img src=new-logo-long.png width=300/></center>
-<hr>
+![HEADER](./readme-header.png)
+
+<div>
+<div style="float: left; display: flex; align-items: center" >
 <a href='https://gitee.com/GXDE-OS/GXDE/stargazers'><img src='https://gitee.com/GXDE-OS/GXDE/badge/star.svg?theme=dark' alt='star'></img></a>
-
-![G-Start](https://gitcode.com/GXDE-OS/GXDE/star/badge.svg)  
-
-
-**[English](/README.md)**
+<img src='https://gitcode.com/GXDE-OS/GXDE/star/badge.svg' alt='G-Star'></img>
+</div>
+<div style="float: right">
+<a href="./README.md">English Version</a>
+</div>
+</div>


 ## 简介
@@ -87,9 +90,6 @@ Gitcode：https://gitcode.com/GXDE-OS

 <p><img src="https://www.gxde.top/install/gf.jpg" style="border-radius: 4px;" ></p>

+<span style="color: #E6004C; font-size: 20px"><b>©2023～Now gfdgd xi</b></span>

-### 广告
-支付宝官方活动，扫描获得支付红包！  
-<p><img src="Icon/QR/advertisement0.jpg" width="250" ></p>
-
-# ©2023～Now gfdgd xi
+<div style="background: #E6004C; width: 100%; height: 3px;"></div>
@@ -0,0 +1,33 @@
+# PKGBUILD for testing purpose.
+
+pkgname=gxde-example
+pkgver=0
+pkgrel=1
+pkgdesc="GXDE example component"
+arch=('x86_64' 'aarch64')
+url="https://github.com/GXDE-OS/${pkgname}"
+license=('GPL-3.0-or-later')
+
+depends=('qt5-base')
+makedepends=('git' 'cmake' 'qt5-tools')
+source=()
+sha256sums=()
+
+_srcdir() {
+    git -C "$startdir" rev-parse --show-toplevel
+}
+
+pkgver() {
+    head -n 1 "$(_srcdir)/debian/changelog" | sed -E 's/.*\(([^)]*)\).*/\1/; s/^[0-9]+://; s/-/./g'
+}
+
+build() {
+    cmake -B build -S "$(_srcdir)" \
+        -DCMAKE_BUILD_TYPE=Release \
+        -DCMAKE_INSTALL_PREFIX=/usr
+    cmake --build build
+}
+
+package() {
+    DESTDIR="$pkgdir" cmake --install build
+}
@@ -1,4 +1,4 @@
-gxde (2026.02.06) UNRELEASED; urgency=medium
+gxde (2026.10.26) UNRELEASED; urgency=medium

  * 新增 remmina 以解决远程问题
  * 改为安装 dde-printer 
@@ -23,8 +23,15 @@ gxde (2026.02.06) UNRELEASED; urgency=medium
  * 新增 GXDE 硬件管理器
  * 推荐安装 deepin 跨端协同
  * 更改 gxde-desktop-extra 推荐依赖
+  * 推荐安装 firmware-atheros | firmware-ath9k-htc
+  * gxde-desktop-android 指定安装 spark-store 而不是可选安装 aptss
+  * 添加推荐依赖 deepin-liferaft
+  * 新增推荐依赖 gxde-dlna-caster
+  * 新增推荐依赖 gxde-filetransfer
+  * 新增推荐依赖 gxde-wayland-session, gxdm-emergency-mode, gxde-freewb, fcitx5-theme-deepin
+  * 移除星火动态壁纸依赖

- -- gfdgd_xi <3025613752@qq.com>  Fri, 06 Feb 2026 20:04:16 +0800
+ -- gfdgd_xi <3025613752@qq.com>  Mon, 26 Oct 2026 21:57:06 +0800

 gxde (2024.10.20) UNRELEASED; urgency=medium

@@ -34,8 +34,8 @@ Recommends: ${misc:Depends},
 deepin-system-monitor,
 gxde-downloader,
 gparted,
- fantascene-dynamic-wallpaper,
 x11vnc,
+ gxde-dlna-caster,
 com.github.minesweep,
 2048-qt,
 papirus-icon-theme | gxde-desktop-android,
@@ -48,7 +48,14 @@ Recommends: ${misc:Depends},
 deepin-log-viewer,
 fcitx5-table-wubi98,
 fcitx5-pinyin-zhwiki,
+ gxde-freewb,
+ fcitx5-theme-deepin,
 dde-cooperation,
+ firmware-atheros,
+ deepin-liferaft,
+ gxde-wayland-session,
+ gxde-filetransfer,
+ gxdm-emergency-mode,
 Description: GXDE New Desktop Environment Extra - Next
 This is a meta package depends GXDE New Desktop Envrionment Extra.
 .
@@ -68,7 +75,7 @@ Depends:
 gxde-font-installer, 
 gxde-movie, 
 gxde-quick-hash, 
- spark-store | aptss, 
+ spark-store, 
 deepin-system-monitor,
 gxde-control-center,
 gxde-file-manager,
@@ -89,7 +96,8 @@ Conflicts:
 linux-kernel-oldstable-gxde-loong64,
 plymouth,
 tela-grub2-themes,
- plymouth-theme-gxde-logo,
+ firmware-atheros,
+ firmware-ath9k-htc,
 Description: GXDE New Desktop Environment For PRoot - Next
 This is a meta package depends GXDE New Desktop Envrionment in Android PRoot.
 .
@@ -164,7 +172,6 @@ Recommends:
 plymouth-theme-gxde-logo,
 fcitx5,
 fcitx5-table,
- fantascene-dynamic-wallpaper,
 x11vnc,
 apt-is-aptss,
 Conflicts:
@@ -0,0 +1,4 @@
+# GXDE Arch Linux pacman source
+[gxde]
+SigLevel = Optional TrustAll
+Server = https://repo1.gxde.top/gxde-arch/$arch
@@ -1,73 +1,146 @@
-#!/bin/bash
+#!/usr/bin/env python3
+# -*- coding: utf-8 -*-
+"""
+将 Gitee 上的 GXDE-OS 组织仓库镜像同步到 GitHub（GXDE-OS 组织）。
+
+用法:
+    python3 sync.py <gitee用户名> <gitee密码或Token> <github用户名> <githubToken>
+
+流程:
+    1. 通过 Gitee API v5 分页获取 GXDE-OS 组织下的全部仓库列表（带 token 失败时回退匿名）
+    2. 多线程 clone --bare 拉取 Gitee 仓库
+    3. 逐个 push --mirror 推送到 GitHub，失败自动重试并在结束时汇总报告
+"""
+import json
 import os
+import subprocess
 import sys
 import time
-import requests
-import threading
+import urllib.parse
+import urllib.request
+from concurrent.futures import ThreadPoolExecutor, as_completed

-programPath = os.path.split(os.path.realpath(__file__))[0]  # 返回 string
-dataHeaders = {
-    "accept": "application/json"
-}
-pullUrl = "https://gitee.com/GXDE-OS/"
-pushUrl = [
-    "https://@USER@:@PASS@@github.com/GXDE-OS/",
-    "https://@USER@:@PASS@@gitcode.com/GXDE-OS/",
-    "https://@USER@:@PASS@@atomgit.com/GXDE-OS/"
-]
+programPath = os.path.split(os.path.realpath(__file__))[0]
+cloneDir = os.path.join(programPath, "git-clone")
+orgName = "GXDE-OS"
+perPage = 100
+threadMax = 8

-if (len(sys.argv) < 1 + len(pushUrl) * 2):
-    print(f"请输入用于推送的账户和密码（需要 {len(pushUrl)} 组以推送不同的平台，提供顺序如下）")
-    for i in pushUrl:
-        print(f"    {i}")
-    exit(1)

-# 读取参数
-userName = []
-password = []
-for i in range(1, len(sys.argv)):
-    # 输入账户
-    if (i % 2 == 1):
-        userName.append(sys.argv[i])
-    # 输入密码
-    if (i % 2 == 0):
-        password.append(sys.argv[i])
+def usage():
+    print("用法: python3 sync.py <gitee用户名> <gitee密码或Token> <github用户名> <githubToken>")
+    sys.exit(1)

-def sync(i):
-    global thread
-    # 拉取代码进行同步
-    if (not os.path.exists(f"{programPath}/git-clone")):
-        os.makedirs(f"{programPath}/git-clone")
-    print(f"======================> {pullUrl}/{i}")
-    os.system(f"cd '{programPath}/git-clone' ; git clone --bare '{pullUrl}/{i}'")
-    # 推送
-    for j in range(len(pushUrl)):
-        # git remote set-url origin 
-        gitUrl = pushUrl[j].replace("@USER@", userName[j]).replace("@PASS@", password[j]) + "/" + i
-        os.system(f"cd '{programPath}/git-clone/{i}.git' ; git remote set-url origin '{gitUrl}'")
-        os.system(f"cd '{programPath}/git-clone/{i}.git' ; git push --mirror")
-    # 移除临时文件
-    os.system(f"rm -rf '{programPath}/git-clone/{i}.git'")
-    thread -= 1

-data = requests.get("https://github.com/orgs/GXDE-OS/repos_list?q=&page=1", headers=dataHeaders).json()
-# 获取页数
-page = int(data["pageCount"])
-repoList = []
-# 获取仓库列表
-for i in range(1, page + 1):
-    pageData = requests.get(f"https://github.com/orgs/GXDE-OS/repos_list?q=&page={i}", headers=dataHeaders).json()
-    repositories = pageData["repositories"]
-    for j in repositories:
-        repoList.append(j["name"])
-# 多线程处理以提升速度
-thread = 0
-threadMax = 32
-for i in repoList:
+def apiGet(path, params):
+    """调用 Gitee API v5 的单个请求"""
+    params["per_page"] = str(perPage)
+    url = "https://gitee.com/api/v5" + path + "?" + urllib.parse.urlencode(params)
+    req = urllib.request.Request(url, headers={"User-Agent": "GXDE-Sync/1.0"})
+    with urllib.request.urlopen(req, timeout=30) as resp:
+        return json.loads(resp.read().decode("utf-8"))
+
+
+def getGiteeRepos(token):
+    """分页获取 Gitee 组织下全部仓库的 path（URL 安全路径）
+
+    Gitee API 返回的 name 是仓库别名（可能含大写、中文或括号，如
+    "CTranslate2"），不能直接用作 clone URL 的路径组件；path 才是 URL
+    安全的仓库路径（如 "ctranslate2"），用它拼接 clone/push URL 才合法。
+    """
+    repoList = []
+    page = 1
    while True:
-        time.sleep(0.1)
-        if (thread < threadMax):
-            threading.Thread(target=sync, args=[i]).start()
-            thread += 1
+        params = {"page": str(page)}
+        if token:
+            params["access_token"] = token
+        data = apiGet(f"/orgs/{orgName}/repos", params)
+        if not isinstance(data, list) or len(data) == 0:
            break
+        repoList.extend([i["path"] for i in data])
+        page += 1
+    return repoList

+
+def runGit(args, cwd=None):
+    return subprocess.run(args, cwd=cwd, stdout=subprocess.PIPE,
+                          stderr=subprocess.STDOUT, text=True)
+
+
+def syncRepo(name, pullUrl, pushUrl):
+    repoDir = os.path.join(cloneDir, name + ".git")
+    try:
+        # 1. 从 Gitee clone --bare（重试 3 次）
+        ok = False
+        lastOut = ""
+        for attempt in range(3):
+            result = runGit(["git", "clone", "--bare", pullUrl + name, repoDir])
+            if result.returncode == 0:
+                ok = True
+                break
+            lastOut = result.stdout
+            time.sleep(5)
+        if not ok:
+            print(f"[FAIL] clone 失败: {name}\n{lastOut}")
+            return False
+
+        # 2. push --mirror 到 GitHub（重试 3 次）
+        ok = False
+        lastOut = ""
+        for attempt in range(3):
+            result = runGit(["git", "-C", repoDir, "push", "--mirror", pushUrl + name])
+            if result.returncode == 0:
+                ok = True
+                break
+            lastOut = result.stdout
+            time.sleep(5)
+        if not ok:
+            print(f"[FAIL] push 失败: {name}\n{lastOut}")
+            return False
+
+        print(f"[ OK ] 同步完成: {name}")
+        return True
+    finally:
+        # 清理临时目录
+        runGit(["rm", "-rf", repoDir])
+
+
+def main():
+    if len(sys.argv) < 5:
+        usage()
+    giteeUser, giteeToken = sys.argv[1], sys.argv[2]
+    githubUser, githubToken = sys.argv[3], sys.argv[4]
+
+    pullUrl = f"https://{urllib.parse.quote(giteeUser)}:{urllib.parse.quote(giteeToken)}@gitee.com/{orgName}/"
+    pushUrl = f"https://{urllib.parse.quote(githubUser)}:{urllib.parse.quote(githubToken)}@github.com/{orgName}/"
+
+    os.makedirs(cloneDir, exist_ok=True)
+
+    # 获取仓库列表：优先带 token，失败则回退到匿名（仅公开仓库）
+    try:
+        repoList = getGiteeRepos(giteeToken)
+    except Exception:
+        repoList = getGiteeRepos("")
+    print(f"共获取到 {len(repoList)} 个仓库")
+    if not repoList:
+        print("未能获取仓库列表，退出")
+        sys.exit(1)
+
+    failed = []
+    with ThreadPoolExecutor(max_workers=threadMax) as pool:
+        futures = {pool.submit(syncRepo, n, pullUrl, pushUrl): n for n in repoList}
+        for future in as_completed(futures):
+            if not future.result():
+                failed.append(futures[future])
+
+    print("=" * 50)
+    print(f"同步完成: 成功 {len(repoList) - len(failed)} / {len(repoList)}")
+    if failed:
+        print("以下仓库同步失败:")
+        for name in failed:
+            print("  -", name)
+        sys.exit(1)
+
+
+if __name__ == "__main__":
+    main()
@@ -0,0 +1,112 @@
+#!/bin/bash
+
+# Copyright (C) 2026 CharOfString <root@charofstring.cc>
+#
+# This program is free software: you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation, either version 3 of the License, or (at your option) any later
+# version.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program. If not, see <https://www.gnu.org/licenses/>.
+# -----------------------------------------------------------------------------
+# 本脚本用于向GXDE Arch源上传包并更新数据库，由building-pkg.yml自动调用
+#   用法：
+#     arch-repo-update.sh <x86_64|aarch64> <arch-xxx.tar>
+#   依赖：
+#     repo-add、bsdtar、flock (Archlinux自带；Debian上需要安装pacman-package-manager、libarchive-tools)
+#   环境变量：
+#     GXDE_ARCH_REPO_ROOT  源根目录，对外地址为 https://repo1.gxde.top/gxde-arch/$arch
+#     GXDE_ARCH_GPG_KEY    可选，设置后对包和数据库进行签名
+# -----------------------------------------------------------------------------
+# This script updates the artifacts in GXDE pacman source and is invoked by
+# building-pkg.yml automatically.
+# Usage:
+#   arch-repo-update.sh <x86_64|aarch64> <arch-xxx.tar>
+# Dependencies:
+#   repo-add, bsdtar, flock (Archlinux built-in; on Debian, install pacman-package-manager
+#   and libarchive-tools)
+# Environment variables:
+#   GXDE_ARCH_REPO_ROOT  The root directory of the source, externally accessible at
+#                        https://repo1.gxde.top/gxde-arch/$arch
+#   GXDE_ARCH_GPG_KEY    Optional, if set, will sign the packages and database.
+
+set -e
+arch=$1
+tar_path=$2
+repo_root=${GXDE_ARCH_REPO_ROOT:-/var/www/repo/gxde-arch}
+repo_name=gxde
+
+# 引用/Works Cited: https://patorjk.com/software/taag/#p=display&f=Linguaholic+Shadow+3D
+echo '  ██████╗██╗     ██╗██████╗  ████████╗           ████╗                     ' &&
+echo '██╔═════╝╚═██╗ ██╔═╝██╔═══██╗██╔═════╝         ██╔═══╝  ████╗  ██╗ ████╗   ' &&
+echo '██║ ████╗  ╚═██╔═╝  ██║   ██║██████╗         ██████╗  ██╔═══██╗████╔═══╝   ' &&
+echo '██║ ╚═██║  ██╔═██╗  ██║   ██║██╔═══╝         ╚═██╔═╝  ██║   ██║██╔═╝       ' &&
+echo '╚═██████║██╔═╝ ╚═██╗██████╔═╝████████╗         ██║    ╚═████╔═╝██║         ' &&
+echo '  ╚═════╝╚═╝     ╚═╝╚═════╝  ╚═══════╝         ╚═╝      ╚═══╝  ╚═╝         ' &&
+echo '                                                                           ' &&
+echo '                                                                           ' &&
+echo '  ████╗                    ██╗      ██╗      ██╗                           ' &&
+echo '██╔═══██╗██╗ ████╗  ██████╗██████╗  ██║      ╚═╝██████╗  ██╗   ██╗██╗   ██╗' &&
+echo '████████║████╔═══╝██╔═════╝██╔═══██╗██║      ██╗██╔═══██╗██║   ██║╚═████╔═╝' &&
+echo '██╔═══██║██╔═╝    ██║      ██║   ██║██║      ██║██║   ██║██║   ██║  ████║  ' &&
+echo '██║   ██║██║      ╚═██████╗██║   ██║████████╗██║██║   ██║╚═██████║██╔═══██╗' &&
+echo '╚═╝   ╚═╝╚═╝        ╚═════╝╚═╝   ╚═╝╚═══════╝╚═╝╚═╝   ╚═╝  ╚═════╝╚═╝   ╚═╝'
+
+# repo-add依赖bsdtar读取包，缺失时只会报"is not a package file"
+# repo-add needs bsdtar to read packages, without it it only says "is not a package file".
+for cmd in repo-add bsdtar flock; do
+    if ! command -v $cmd > /dev/null; then
+        echo "$cmd not found, install pacman-package-manager and libarchive-tools" >&2
+        exit 1
+    fi
+done
+
+case $arch in
+    x86_64|aarch64) ;;
+    *) echo "Unsupported arch: $arch" >&2; exit 1 ;;
+esac
+
+if [[ ! -f $tar_path ]]; then
+    echo "$tar_path not found" >&2
+    exit 1
+fi
+
+repoDir=$repo_root/$arch
+mkdir -p $repoDir
+exec 9> $repoDir/.lock
+flock 9
+
+tmpDir=$(mktemp -d)
+trap "rm -rf $tmpDir" EXIT
+tar -xf $tar_path -C $tmpDir
+
+newPackages=()
+for pkg in $tmpDir/*.pkg.tar.*; do
+    [[ $pkg == *.sig ]] && continue
+    name=$(basename $pkg)
+    mv -f $pkg $repoDir/$name
+    if [[ -n $GXDE_ARCH_GPG_KEY ]]; then
+        rm -f $repoDir/$name.sig
+        gpg --batch --yes -u $GXDE_ARCH_GPG_KEY --detach-sign --no-armor $repoDir/$name
+    fi
+    newPackages+=($repoDir/$name)
+done
+
+if [[ ${#newPackages[@]} == 0 ]]; then
+    echo "No package in $tar_path" >&2
+    exit 1
+fi
+
+signArgs=()
+if [[ -n $GXDE_ARCH_GPG_KEY ]]; then
+    signArgs=(--sign --key $GXDE_ARCH_GPG_KEY)
+fi
+
+repo-add -R "${signArgs[@]}" $repoDir/$repo_name.db.tar.gz "${newPackages[@]}"
+rm -f $tar_path
Author	SHA1	Message	Date
gfdgd-xi	cb28036eec	移除依赖星火动态壁纸 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-10-26 21:58:50 +08:00
gfdgd-xi	e05436265a	debian rootfs环境内置包qt6-base-dev,qt6-base-private-dev Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-10-26 19:45:18 +08:00
gfdgd-xi	4d67c0c2f0	Revert "使用解压rootfs替代debootstrap,提升速度" This reverts commit `cec74ff92c`. Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-10-26 19:41:50 +08:00
gfdgd-xi	cec74ff92c	使用解压rootfs替代debootstrap,提升速度 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-10-26 19:25:28 +08:00
gfdgd-xi	e094939b96	移除交叉编译hetao构建 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-10-16 22:12:09 +08:00
gfdgd-xi	3ae20c5867	移除核桃构建 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-10-15 13:55:16 +08:00
CharOfString	ff4666cd2c	fix: ACSII art display issue	2026-10-11 22:03:33 -05:00
CharOfStringandClaude Opus 5.5	2fe5b8b9d1	chore: Hide Arch repo update output Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-10 21:22:49 -05:00
CharOfString	a23074725a	exp: Fix arch pkg upload	2026-10-10 21:12:24 -05:00
CharOfStringandClaude Opus 5.5	7e1d43b057	fix: Show Arch repo update output Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-10 21:06:11 -05:00
CharOfString	bf87ba2f2b	fix: AARCH64 Archlinux build	2026-10-10 19:45:04 -05:00
CharOfString	c215251f38	fix: Arch building	2026-10-10 19:34:28 -05:00
CharOfString	d8c5ea88e0	add: Build Archlinux	2026-10-10 18:40:39 -05:00
gfdgd-xi	09945e156a	feat: 新增推荐依赖gxdm-emergency-mode, gxde-freewb, fcitx5-theme-deepin Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-10-04 20:40:59 +08:00
CharOfString	64f4c6b4b3	chore(CharOfString): 更新提交邮箱	2026-09-22 11:38:41 -05:00
shenmo7192andGitee	e4d7046327	extra add filetransfer Signed-off-by: shenmo <jifengshenmo@outlook.com>	2026-08-25 13:50:47 +00:00
shenmo7192andGitee	4130492385	add GXDE Wayland PreInstalled Signed-off-by: shenmo <jifengshenmo@outlook.com>	2026-08-23 12:40:06 +00:00
gfdgd-xi	87ee719ea4	新增推荐依赖gxde-dlna-caster Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-08-11 07:58:55 +08:00
gfdgd-xi	23aba101a6	添加推荐依赖deepin-liferaft Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-08-06 18:08:37 +08:00
shenmo7192	8ee15d5725	fix(sync.py): 修正Gitee仓库名称获取逻辑，使用安全路径 Gitee的name字段可能包含非法字符，改用path作为仓库URL安全路径，确保clone/push URL合法	2026-08-03 19:39:56 +08:00
shenmo7192	a6f6c26fb9	ci(github workflow): simplify sync workflow and rewrite sync script 1. 移除多余的第三方同步目标和依赖包 2. 将原bash脚本重写为python脚本，新增多线程同步、失败重试和同步报告 3. 精简工作流的环境变量和执行参数	2026-08-03 19:16:34 +08:00
gfdgd-xi	eebd5d7817	修复github项目页图片缺失的问题 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-07-29 09:49:43 +08:00
gfdgd-xi	dd3d0e1a34	使用gitee令牌拉取仓库 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-07-25 18:28:20 +08:00
CharOfString	73a77bb9ca	polish: README	2026-07-24 00:08:32 +08:00
gfdgd-xi	96feeb840f	调整ssh加密方式 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-07-14 11:23:59 +08:00
gfdgd-xi	7633dbe0fb	Bump version 2026.07.11 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-07-11 14:13:21 +08:00
gfdgd-xi	572c5f3d13	Merge branch 'pr_19' Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-07-11 14:12:17 +08:00
gfdgd-xi	9c74df09be	调整ssh加密方式 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-07-11 12:59:54 +08:00
zeqiandGitee	61b011f9dd	修复编译失败 Signed-off-by: zeqi <a202128502@163.com>	2026-07-10 09:42:00 +00:00
gfdgd-xi	141a767e20	gxde-desktop-android 指定安装 spark-store 而不是可选安装 aptss Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-07-09 10:35:25 +08:00
gfdgd-xi	6bf8cb2c52	移除广告 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-07-04 09:23:39 +08:00
gfdgd-xiandGitee	d877a80884	!17 修改MAINTAINERS顺序按照字母表排序 Merge pull request !17 from CharOfString/N/A	2026-06-26 23:03:26 +00:00
CharOfStringandGitee	879ecb2926	修改MAINTAINERS顺序按照字母表排序 Signed-off-by: CharOfString <markus_verify@126.com>	2026-06-26 18:28:19 +00:00
gfdgd-xi	ad749b551b	更换deepin源地址 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-06-10 19:23:09 +08:00
gfdgd-xi	4625c03c78	删除linux-libc-dev Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-05-16 20:59:42 +08:00
gfdgd-xi	d2e6e5dde1	编译环境内置wget包 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-05-16 12:16:18 +08:00
gfdgd-xi	257ec720e1	处理loong64 debian13 gpg签名问题 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-05-16 12:10:19 +08:00
gfdgd-xi	c32e2ca563	设置自动添加[trusted=true] Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-05-10 22:18:01 +08:00
gfdgd-xi	afd0d7d71e	添加环境变量DEBIAN_FRONTEND=noninteractive Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-05-09 22:40:05 +08:00
gfdgd-xi	8c0ad2bc93	修复bookworm未正常添加安全源的问题 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-05-09 22:37:39 +08:00
gfdgd-xi	98a89915e1	使用不限速的源地址 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-05-09 09:11:36 +08:00
gfdgd-xi	282c4ec982	修复环境变量未传入configure-building-enviroment.sh导致交叉编译出错的问题 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-05-09 08:26:28 +08:00
gfdgd-xi	0c23e00622	补充交叉编译缺失的环境变量 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-05-07 22:01:23 +08:00
gfdgd-xiandGitee	78d1775624	update .github/workflows/sources-zhuangzhuang-loong64.list. Signed-off-by: gfdgd xi <3025613752@qq.com>	2026-05-04 22:37:14 +00:00
gfdgd-xi	e96dbab83a	修复loong64 zhuangzhuang交叉编译问题 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-05-04 23:09:38 +08:00
gfdgd-xi	126f1cd95e	meimei构建未删全 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-05-04 22:55:40 +08:00
gfdgd-xi	31147bb580	移除mips构建 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-05-04 22:48:12 +08:00
gfdgd-xi	82a741a08e	调整meimei构建 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-05-03 21:49:43 +08:00
shenmo7192andGitee	006e59e54e	!16 修改维护者列表 Merge pull request !16 from CharOfString/master	2026-05-03 11:30:46 +00:00
CharOfString	179a8df1ec	修改维护者列表	2026-05-03 06:29:43 -05:00
gfdgd-xi	6e9ba79203	修复arm构建加源错误的问题 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-04-18 11:01:04 +08:00
gfdgd-xi	5e9cd51a31	GXDE\ mips cross直接使用源站进行构建 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-04-18 10:45:20 +08:00
gfdgd-xi	4ad940aeb3	GXDE\ mips 直接使用源站进行构建 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-04-18 10:34:52 +08:00
gfdgd-xi	d3cf1f3faa	修改hetao 系统源地址至mirror.math.princeton.edu Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-04-18 10:21:38 +08:00
gfdgd-xi	4ae19694a3	调整hetao源地址 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-04-15 22:36:07 +08:00
gfdgd-xi	46c0155137	修复meimei交叉编译时未正确添加meimei源的问题 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-04-15 22:14:52 +08:00
gfdgd-xi	a1996dfc42	优化源码获取步骤 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-04-12 08:11:46 +08:00
gfdgd-xi	4669494602	支持get-orig-source特性 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-04-11 19:33:05 +08:00
gfdgd-xi	998b5808b2	停用riscv64 backport Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-03-20 13:35:36 +08:00
gfdgd-xi	5c4864cd07	补充mips64el交叉编译 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-03-17 21:53:08 +08:00
gfdgd-xi	fcf78ddf76	移除自动构建扩容部分 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-03-08 13:42:29 +08:00
gfdgd-xi	2d0ed0d0ee	恢复zhuangzhuang-mips构建 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-02-27 17:03:42 +08:00
gfdgd-xi	a1d60cf87c	恢复 i386 zhuangzhuang 构建 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-02-25 07:52:53 +08:00
gfdgd-xi	14c042dec3	调整推荐依赖firmware-atheros为firmware-atheros \| firmware-ath9k-htc Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-02-24 14:00:59 +08:00
gfdgd-xi	0681555067	交叉编译移除 tianlu Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-02-11 15:47:26 +08:00
gfdgd-xi	38dbe7a12f	补充backport构建 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-02-11 10:18:03 +08:00
gfdgd-xi	3bb1ee694b	修复因github API修改导致仓库同步错误的问题 Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-02-10 21:01:09 +08:00
gfdgd-xi	99c5321d8b	推荐安装firmware-atheros Signed-off-by: gfdgd_xi <3025613752@qq.com>	2026-02-08 14:02:10 +08:00